Você não tem itens no seu carrinho de compras.
SPECIAL OFFER ENDS IN
Applicable machines: laser engraving machines such as SCULPFUN S9/S6pro/S6、ATOMSTACK A5/A5Pro、ORTUR(12V Version), ELEKSMAKER, or DIY 3D printers, CNC machine tools.
How to judge whether the S30 Pro laser is suitable for use? You need to pay attention that the input voltage of the S30 Pro laser is 12V, and the S30 Pro is a 3pin interface.
Engraving material: all kinds of wood (including walnut, cherry and other high-density wood), MDF, zigzag, cardboard, plastic, leather, PCB board, aluminum oxide, 304 stainless steel, ceramic, dark stone
Cutting material: all kinds of wood (including walnut, cherry and other high-density wood), MDF, acrylic board, cardboard, non-woven, bamboo, leather, some plastic boards, PCB boards
Laser output power: 10W (light energy)
Inner diameter of air pipe: 7.5mm (recommended to use 30L/min, 0.03Mpa air compressor, out diameter of nozzle:8mm)
Laser wavelength 455±5nm
Laser type and fixed focus: fixed focus laser, fixed focus through 50mm measuring column
Laser protection cover: Equipped with a detachable laser protection cover to protect the eyes. You can adjust it up and down, or remove the goggles.
Laser shell material: aluminum alloy
Laser circuit board parameters:
Circuit Board Size: 40*40mm
Circuit Board:12V/PWM modulation board
Input voltage: 12V
Max Input of laser module:12V 5A
Wire Rod:HY2.0, 3Pin terminal (3-core cable, A: PWM +, B: GND, C: VCC ).
Fan:12V 0.15A 4020 fan
Fan speed: 15000 rpm
Operating temperature: -20 ℃ to 70 ℃
7.5mm inner diameter air tube*1
acrylic protective cover*1
S30 Pro Laser head*1
50mm measuring column*1
Screw and tool kit*1
The laser power of S30 Pro is increased to 10W, which is twice that of S9. But getting the same 0.08mm focus ultra-fine laser beam as the S9 means that the S30 Pro has higher energy density, stronger cutting penetration and engraving capabilities.
Combining advanced high-speed air assist and 10W high-energy density laser, the S30 Pro reflects industrial-grade wood cutting performance: first, the cutting efficiency is greatly improved, and the cutting is faster; second The cutting penetration is stronger, and many high-density woods can be cut; the third is that the cutting surface is cleaner, and the powerful airflow blows away the residue, so that the surface of the cutting object is free of any stains.
SCULPFUN laser module has an ingenious and highly compatible structural connection device, which can be well adapted to different laser engraving machines, laser cutting machines, 3D printers, CNC milling machines, etc. It can be installed on various brands of machines, such as SCULPFUN S9/S6pro/S6, ATOMSTACK A5/A5Pro, ORTUR (12V version) laser engraving machine, or other DIY type machines can be used.
The S30 Pro laser adopts an innovative replaceable lens, which greatly improves the service life of the laser, which is more than 10 times longer than that of other general lasers. When the lens is damaged or after long-term use, the lens can be replaced to restore the cutting power. A free lens is included with the purchase, which is very cheap and can be easily purchased from SCULPFUN.
S30 Pro is equipped with an advanced high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving the cutting efficiency, and the cutting speed is more than 5 times faster than that without air assistance. The powerful airflow blows away the residue, making the cut surface very clean.
The S30 Pro is equipped with a detachable eye shield, which will not dazzle even without glasses. Also if you don't need it, you can easily disassemble it.