Work sharing

SCULPFUN 2022-12-12

#sculpfunchristmas

https://www.facebook.com/groups/sculp...

...

Open

Author: Mirko Tofanelli in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-12-12

#sculpfunchristmas

https://www.facebook.com/groups/sculp...

...

Open

Author: William Parker in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-12-12

"Latest cut with my custom S10."

https://www.facebook.com/groups/sculp...

...

Open

Author: William Parker in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-12-02

"Assiette de base IKEA Une couche de gouache noire sur l’assiette avant l’impression 70mm/sec 90% S10 Lavage à l’eau pour enlever la gouache Un début intéressant"

https://www.facebook.com/groups/sculp...

...

Open

Author: Jean Michel in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-12-02

"Commande pour un amis."

https://www.facebook.com/groups/sculp...

...

Open

Author: Jean Fuchs in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-12-02

"Tried glitter EVA foam for the first time with these Christmas decorations. Two layers of 3mm ply with 2mm glitter EVA inlaid."

https://www.facebook.com/groups/sculp...

...

Open

Author: Andy Picton in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-12-02

"S30 pro max at work for Christmas, until now I had used a 5.5w module, for me it's a big step forward for cuts."

https://www.facebook.com/groups/sculp...

...

Open

Author: Mirko Tofanelli in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-12-01

"So I cut this box out on my S10 and engraved it and the clock and made the hands on my S9. I think this will be how I deliver the clocks from now on. Helps to protect the hands, especially when I know that they will be Christmas presents."

https://www.facebook.com/groups/sculp...

...

Open

Author: Larry Wood in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-12-01

"I must say…. I’m pretty darn proud I literally just got my machine this week, never had one before and these are my first completed projects! I have the s6 pro!"

https://www.facebook.com/groups/sculp...

...

Open

Author: Amy Harris in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-12-01

"Projects 2 x Christmas Standing Balls 3D"

https://www.facebook.com/groups/sculp...

...

Open

Author: Chris Christopher in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-12-01

"Heute mal Essen Deko getestet. S30 pro max 500/60% 1 Durchgang"

https://www.facebook.com/groups/sculp...

...

Open

Author: Mario Peischl in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-12-01

"Geniet van de scene waar je de kerstman en zijn elfjes bezig ziet in hun werkplaats."

https://www.facebook.com/groups/sculp...

...

Open

Author: Lydie Du in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-12-01

"My very first laser engraving project. Very satisfied with the S30 max pro. Indeed I have a lot to learn still, but did learn a lot in this project."

https://www.facebook.com/groups/sculp...

...

Open

Author: Ellis Méndez Hidaka in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-12-01

"Dragon layer art Do you like my work? I am very satisfied with the effect of adding lights"

https://www.facebook.com/groups/sculp...

...

Open

Author: Alex Moore in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-30

"Hello les crameurs cp 3.6mm 4passes 300 mm min 85% air assist, constant power gravure 2000 mm min 40 %"

https://www.facebook.com/groups/sculp...

...

Open

Author: Donovan Stone in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-30

"The S30 Pro Max with X&Y expansion kit is knocking out the orders "

https://www.facebook.com/groups/sculp...

...

Open

Author: David Shaw in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-30

"Christmas Tree done. Happy with my first designs."

https://www.facebook.com/groups/sculp...

...

Open

Author: Karel Willems in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-30

"In Wales we have bilingual signs so doing my bit for language. 2.5mm ply 380/80/3 cut Text engraving kingly xmas script 2500/50/1 fill."

https://www.facebook.com/groups/sculp...

...

Open

Author: Allan Jones in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-30

"Re-created in Lightburn then cut/engraved on my S9. The original ornament did not have lights but I had a box of fairy lights and thought this would be a great way to use them. It's for an ornament exchange at my women's group next month."

https://www.facebook.com/groups/sculp...

...

Open

Author: Shirley Penrose in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-29

SCULPFUN

https://www.facebook.com/groups/sculp...

...

Open

Author: Zulfiqar Ali in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-28

"Leather patches hand stitched on caps"

https://www.facebook.com/groups/sculp...

...

Open

Author: Kim Liao in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-28

"Reduce waste - Done! Hello fellow sculpfun'ers. At the moment i am batching out a lot of the christmas ornaments (like the big one on the photo). They are 8cm wide. I am using Walnut plywood, 1.5mm on a plate that is 40cmx60cm. When i am doing this, it means that i were having a line of waste of 5,4mm...that waste is now being utilized to earrings 🙂 The earrings are 3.5cm wide, and will come free with each purchase . So far, the customers are very happy 🙂

https://www.facebook.com/groups/sculp...

...

Open

BTW...all done on Sculpfun S9, with air assist. 400 speed, 80%, 3 passes. The turtle (without the circels) are from the librarys of @LAHobbyguy 🙂 Thanks Rich! The christmas ornament is purchased on etsy." Author: Michael Schmøde in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-28

Sculpfun"

https://www.facebook.com/groups/sculp...

...

Open

Author: Attila Kiss in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-28

Sculpfun"

https://www.facebook.com/groups/sculp...

...

Open

Author: József Tordai in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-26

"The lantern is cut, now to clean joints when glue dry, 2.5mm basswood cut with S9 480/80/3pass."

https://www.facebook.com/groups/sculp...

...

Open

Author: Allan Jones in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-26

"Made this modular system chair for my brand 7R with my sculpfun s6 pro. I used vegan leather 2mm 85% at 300mms 1 pass and pine 5mm plywood 85% power 190mms 4 passes. The wood is stained with American oak ink, and the leather cylinders are hand stitched from behind."

https://www.facebook.com/groups/sculp...

...

Open

Author: Rash in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-25

"I got the S30 Pro Max today. The 935x905 extension is still on its way, but the curiosity to compare it to the S10 I have, kept me from waiting. In half an hour I assembled and confirmed, cuts twice as fast. The granddaughters will be pleased with the earrings."

https://www.facebook.com/groups/sculp...

...

Open

Author: Ryszard Rogulski in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-25

"Hechas con sculpfun s6 pro"

https://www.facebook.com/groups/sculp...

...

Open

Author: Ip Gom in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-24

"Cabina Telefonica lavorazione su sculpfun s10 più air assist su pioppo da 4mm, velocità 1000 potenza 80 passaggi 2, altezza 30 cm"

https://www.facebook.com/groups/sculp...

...

Open

Author: Dany Jack in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-24

"Mi soddisfa sempre di più questo laser... però ancora devo trovare i giusti parametri per l'incisione perché c'è qualcosa che non mi convince. Utilizzo 900 velocità, Smax 60% C'è qualcuno che utilizza S9 e vuole confrontare o suggerire qualcosa?"

https://www.facebook.com/groups/sculp...

...

Open

Author: Elena Ruvio in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-23

"S30 Pro Max. Ich liebe ihn."

https://www.facebook.com/groups/sculp...

...

Open

Author: Hermann Nachreiner in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-23

"Sculpfun S9 Black Acrylic 3mm 200 vel 85% 3 pass. with Air (wood cutted with a cnc)"

https://www.facebook.com/groups/sculp...

...

Open

Author: Giuliano Il Nibbio Sammarco in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-23

"S30 Pro Max. Ich liebe ihn."

https://www.facebook.com/groups/sculp...

...

Open

Author: Hermann Nachreiner in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-22

"Saw it, liked it, made it on S9."

https://www.facebook.com/groups/sculp...

...

Open

Author: Dave Katz in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-22

"Our first glass. I think it turned out great. Sculpfun S9 2000/70"

https://www.facebook.com/groups/sculp...

...

Open

Author: Lana Švenda in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-22

"Tramtadadá.. #S30Pro, #grizzly, #6layers"

https://www.facebook.com/groups/sculp...

...

Open

Author: Petr Hoppus in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-22

At least it works!!!! And it's amazing 🥰🥰🥰 s30 pro max Pine wood 18mm, olive wood 10mm 🥰🥰🥰

https://www.facebook.com/groups/sculp...

...

Open

Author: Stefano Maltauro in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-22

"120mm/min 3 przejazdy sklejka 3mm. Lakier akryl spray niebieski biały . Podświetlenie 1 metr pasek LED baterie 3xAA

https://www.facebook.com/groups/sculp...

...

Open

Author: Marek Ziemski in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-21

"Gravure acier inoxydable sculpfun S10 vitesse 300 puissance 85% Préparation de l'acier avec feutre permanent noir, nettoyage avec acétone ou alcool"

https://www.facebook.com/groups/sculp...

...

Open

Author: R.Castello bijoux en verre in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-21

"Just personalised this food platter, slate 3000/75/1"

https://www.facebook.com/groups/sculp...

...

Open

Author: Allan Jones in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-21

😉

https://www.facebook.com/groups/sculp...

...

Open

Author: in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-21

"Created a city map of my home town as a present for my father who build me an enclosure for my Sculpfun. I can cut the material at 250mm/95% in 1 pass. To get clean cuts did this one at 650mm/95% 3 passes. I was amazed. Some of the small area's I cut out where less then 1 mm wide but came out without being burned. Love this machine 😉"

https://www.facebook.com/groups/sculp...

...

Open

Author: Pieter Spoelstra in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-21

"Heute mal Versuche gemacht auf Nüsse. S10 1000/50%"

https://www.facebook.com/groups/sculp...

...

Open

Author: Mario Peischl in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-21

"Mi orgullo"

https://www.facebook.com/groups/sculp...

...

Open

Author: Rodrigo Ortiz in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-21

"vorbereitungen für den weihnachtsmarkt"

https://www.facebook.com/groups/sculp...

...

Open

Author: Gregor Ganglmair in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-21

"Love my S9 but can't wait till I can afford the S30 Pro with big, more powerful laser module. Here are a couple of things I did with my S9"

https://www.facebook.com/groups/sculp...

...

Open

Author: George DeVirgilio in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-21

"A simple little Christmas tree . . . . But 120 of them. I could NOT have made them on my S6pro, but the S10 goes through 3mm ply like butter. I am getting paid for this. One of my first commissions. I was able to cut through them in 1 pass at 240mm/s but I found it was a little inconsistent... so I dropped it to 210 which was consistent but got some burn marks. In the end I found the best result was 500mm/s, 3 passes, 95% Air Assist on. It takes a little bit longer, but less burns and consistently went through... (I would rather spend more time cutting than spend more time trying to remove things that were not quite through)."

https://www.facebook.com/groups/sculp...

...

Open

Author: Eelko Van Der Does in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-18

"Warta Poznań 120mm/min 3 przejścia 90%mocy sklejka 3mm 3 warstwy lakieru"

https://www.facebook.com/groups/sculp...

...

Open

Author: Marek Ziemski in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-18

"Boule de noël contreplaqué bouleau 3 mm Double épaisseur. Découpe sculpfun S10 vitesse 300 85% laser Grbl 2 passages. Résultat des Sapins prénom marque place 😊 Bouleau 1,5mm"

https://www.facebook.com/groups/sculp...

...

Open

Author: R.Castello bijoux en verre in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-18

"Hello toile s9, 5500mm min 15 % deux couches de blancs une de noir mode stucki lightburn 318 dpi @"

https://www.facebook.com/groups/sculp...

...

Open

Author: Donovan Stone in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-18

"+\- 50 cm high This would be an impossible work with my old lasers. with my new s30 pro max it’s still a big work but he needs only 1 turn on ply hardwood, my old lasers need 12🙃."

https://www.facebook.com/groups/sculp...

...

Open

Author: Leentje Van Gils in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-18

"Herb ŁksŁodź show off your sports work"

https://www.facebook.com/groups/sculp...

...

Open

Author: Marek Ziemski in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-18

"Wine gift box that is also a wine rack to store 3, 6 or 12 bottles of wine. Made with my S6 pro 3mm white faced mdf."

https://www.facebook.com/groups/sculp...

...

Open

Author: George Van Der Walt in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-18

SCULPFUN S9/S10 standard limit switch Open homing positioning function Perfect match S9/S10 Easy to install Direct use no need purchasing additional accessories Main feature: 1. Standard S9/S10 standard limit switch: It is perfectly suitable for S9/S10 machines and can be installed and used directly no need purchasing additional accessories. 2. Open the homing and positioning function: After installing the limit switch, the machine will open the homing and positioning function, which is very suitable for repeated positioning or batch manufacturing work. 3. Complete accessories: The package includes limit switches, cables, screw packs, fixing tapes and other necessities. 4. High compatibility: This limit switch is suitable for 45°V-slot aluminum beams, and can be installed and used on machines similar to beams. Purchase links👉Limit Switches(For S9&S10) ▷Allegro (Poland&European countries):

https://www.facebook.com/groups/sculp...

...

Open

Author: Marek Ziemski in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-17

"Herb ŁksŁodź show off your sports work"

https://www.facebook.com/groups/sculp...

...

Open

Author: Marek Ziemski in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-17

SCULPFUN S9/S10 standard limit switch Open homing positioning function Perfect match S9/S10 Easy to install Direct use no need purchasing additional accessories

https://www.facebook.com/groups/sculp...

...

Open

Main feature: 1. Standard S9/S10 standard limit switch: It is perfectly suitable for S9/S10 machines and can be installed and used directly no need purchasing additional accessories. 2. Open the homing and positioning function: After installing the limit switch, the machine will open the homing and positioning function, which is very suitable for repeated positioning or batch manufacturing work. 3. Complete accessories: The package includes limit switches, cables, screw packs, fixing tapes and other necessities. 4. High compatibility: This limit switch is suitable for 45°V-slot aluminum beams, and can be installed and used on machines similar to beams. Purchase links👉Limit Switches(For S9&S10) in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-16

"Cartas de poker"

https://www.facebook.com/groups/sculp...

...

Open

Author: Tincho Rodriguez in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-16

"2 Leinwände ca (24cm x 30cm) gelasert. - 3 Schichten Acrylfarbe mit dem Pinsel aufgetragen. - Nach jeder Schicht trocknen lassen - 1 Schicht schwarze Sprühfarbe aus der dose gesprüht, schwarze Farbe wurde weg gelasert. - Das Foto mit imag-r auf 282 DPI bearbeitet - Sculpfun S9 / 5000mm/min / 28% Leistung / 90° - Zeilenintervall 0,09mm - pro Bild ca 1 Stunde 10 Minuten Auf meinem instagram Account poste ich alles was ich gelasert hab. Schaut da gerne mal vorbei.

https://www.facebook.com/groups/sculp...

...

Open

https://instagram.com/craftec.ltd?igs... "Author: Raffi Ryder in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-16

""Una más, ya solo me falta pegar bien las piezas"

https://www.facebook.com/groups/sculp...

...

Open

Author: Alas Vargas in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-16

""Una más, ya solo me falta pegar bien las piezas"

https://www.facebook.com/groups/sculp...

...

Open

Author: Alas Vargas in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-16

"Pretty happy with my new product! Made from 3mm mdf 500/85/5 passes"

https://www.facebook.com/groups/sculp...

...

Open

Author: Maree Halloran in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-15

"July Garland is home"

https://www.facebook.com/groups/sculp...

...

Open

Author: Patrick Van Biljon in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-15

"2hrs 54m later, canvas engrave. S9 Imag r, Banning white tile painted black 318dpi Lightburn passthrough 4000mm/min 25% pwr. My first attempt."

https://www.facebook.com/groups/sculp...

...

Open

Author: Allan Jones in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-15

Thanksgiving Giveaway 🍁🍁It’s that time of the year again for the annual Thankful for YOU! 🍁🍁 All you have to do is 👇: https://www.facebook.com/groups/sculp...

...

Open

<Thanksgiving Giveaway 1️⃣ LIKE & FOLLOW Sculpfun Facebook Page and join our group: https://www.facebook.com/groups/sculp... 🥳 2️⃣ Post a pic of Sculpfun machine on your Facebook and dont forget to use hashtag #sculpfunthanksgiving and @Sculpfun 😋That’s it! The lucky winners will be randomly selected. Good luck to all the contestants out there! 🥇Prizes: No.1: Refurbished Sculpfun S9 * 1 (Not brand new but does not affect use.) No.2: S9 Lenses / S10 Laser Lenses/ S9 Air Assist Nozzle *3 ( You can pick one of them you like) 📆Giveaway ends on 18:00 GMT+8, NOV 23rd 2022 and the winners will be announced in the comment. Notes: Thank you all for being a part of this family and Good luck! This competition is in no way sponsored, endorsed or administered, or associated with Facebook. Sculpfun will contact the winner directly through Messengers for shipping address and other details. All rights reserved by Sculpfun.

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-15

"another project Heavy Duty Fire Truck.."

https://www.facebook.com/groups/sculp...

...

Open

Author: Krzysztof Krzysztof in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-14

"Another successfully completed project. This was only the third plywood project. I can't wait for the next one. Poplar plywood, 3mm, Sculpfun s9"

https://www.facebook.com/groups/sculp...

...

Open

Author: Lana Švenda in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-14

"Simpatico gattino... Speed 130 Power 85 1 Pass Plywood 3.8 mm"

https://www.facebook.com/groups/sculp...

...

Open

Author: Fratello d'Italia in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-14

"Another Star with Sculpfun S 9!"

https://www.facebook.com/groups/sculp...

...

Open

Author: Fratello d'Italia in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-14

"Finished light box, I have to make a new purchase because this lets out too much unwanted light Scatola della luce terminata, devo fare un nuovo comperchio perchè questo lascia uscire troppa luce non voluta. S9 370 85% 6pass (a couple of week ago I can run only 5 pass at 400, now 6 at 370 is ok, I think is the "new" stock of plywood Box design boxes.py"

https://www.facebook.com/groups/sculp...

...

Open

Author: Stefano Maltauro in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-14

"Besides from my frame corners which I have still yet to master, im so happy with what I made "

https://www.facebook.com/groups/sculp...

...

Open

Author: Katie Elsegood in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-14

"Project for a baby shower made on s9"

https://www.facebook.com/groups/sculp...

...

Open

Author: Michiel Colling in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-12

"A white tile painted white then engraved using the Baning algorithm in Imag r S9, 1100mm/min, 45% The first picture straight after etch 2nd after clean."

https://www.facebook.com/groups/sculp...

...

Open

Author: Allan Jones in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-12

"S9 / 3mm Oak Plywood / Speed 200 / Power 87 / 3 Cut's"

https://www.facebook.com/groups/sculp...

...

Open

Author: Vesa Karvonen in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-11

"Though incomplete S9 did a wonderful job...1ft by 1ft size..."

https://www.facebook.com/groups/sculp...

...

Open

Author: Suman Chowdhury in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-11

"Hi, what do you think guys !!"

https://www.facebook.com/groups/sculp...

...

Open

Author: Saada Djouad in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-11

"Ritter auf 3 Leinwände (3x) (24cm x 30cm) gelasert. - 3 Schichten Acrylfarbe mit dem Pinsel aufgetragen - 1 Schicht schwarze Sprühfarbe aufgetragen - Das Foto mit imag-r auf 282 DPI bearbeitet

https://www.facebook.com/groups/sculp...

...

Open

- Sculpfun S9 / 4000mm/min / 28% Leistung / 90° - Zeilenintervall 0,09mm - ca 7 Stunde Bin begeistert vom Ergebnis. Auf meinem instagram Account poste ich alles was ich gelasert hab. Schaut da gerne mal vorbei.

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-11

"Ostatnio zrobione -perfekt "

https://www.facebook.com/groups/sculp...

...

Open

Author: Slawek Ostrowski in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-11

"Sculpfun S9, Lightburn, 5000mm/44%/90°/1pass fill & line....pleased"

https://www.facebook.com/groups/sculp...

...

Open

Author: Terry Smith in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow

SCULPFUN 2022-11-11

"Black on white painted canvas, S9 4500mm/40% 90° angle 1pass, kasia glass 318dpi imag r, lightburn passthrough."

https://www.facebook.com/groups/sculp...

...

Open

Author: Allan Jones in Official Group for Sculpfun Users,

https://www.facebook.com/groups/sculp...

Stow